Fender Rack
Fender Rack
Fender Rack
Fender Rack
Fender Rack
Fender Rack
Fender Rack
Fender Rack

Fender Rack

4.8
Rated 4.8 out of 5 stars
104 Reviews
€89,99 €71,99 Épargnez €18,00
Excluding any import duties
/

SUBSCRIBE FOR 10% OFF FIRST PURCHASE

Steadyrack’s Fender Rack is one of the only racks available to store bikes with fenders or mudguards without scratching the frame.
Free shipping in select countries*
Fender Rack
€89,99 €71,99 Épargnez €18,00
/
Excluding any import duties

Due to high demand, this item is currently out of stock
Pre-order now to secure your Fender Rack in our next shipment.

Best for
Bikes WITH Fenders, Road, Time Trial, Hybrid, Small MTB, Commuter, City, Town

Designed for bikes with:

Wheel Diameter: 20” – 29”

Tyre Width: Up to 2.4”

Maximum Weight: 25kg

Bikes with Fenders/Mudguards

Minimum of 20mm or 3/4 Inch Clearance Between Tyre & Stays

The Fender Rack

Combining all of the design benefits of our Classic Rack, our Fender Bike Rack accommodates bikes with fenders or mudguards. Now you can safely and securely store your bike without any heavy lifting and maximise your storage efficiency with the Steadyrack Fender Rack.

If you have an aero or a time trial bike, then the Steadyrack Fender Rack is the right storage product for your bike. These types of bikes usually have a very small gap between the front tyre and the down tube. Thanks to the innovative saddle rest on the Fender Rack, the rack can slide easily in between this tight gap to cradle your valuable bike by its tyre, not the frame.

Some bikes with fenders may not be suitable for this rack.

The Steadyrack Fender Rack works by sliding between the fender/mudguard and tyre when rolling the bike onto the rack. If the stays (steel arms connecting the fender to the bike frame) are very close to the tyre or rigid with no flexibility there may not be room to fit the rack arms between and you will not be able to mount the bike in the rack.

We recommend a minimum 2cm / 3/4 inch clearance between the tyre and stays to enable the rack to flex and fit between.

Be sure to check the length of the back fender or mudguard to ensure you can raise the bike onto the rear tyre enough to roll it in and out of the rack without the fender scraping it on the floor!

Our fender saddles are made from a high quality Nylon material, which allows them to be both flexible enough to hug your tyre, and strong enough to easily hold 35kg. Rest assured, it will cradle your bike for years to come.

Australia WA 2-7 business days after dispatch
ACT, NSW, NT, QLD, SA, TAS, VIC 2-10 business days after dispatch
United Kingdom 2-7 business days
Europe 2-11 business days after dispatch
USA 2-15 business days after dispatch
Canada 2-15 business days after dispatch

*Free shipping is available in select countries. Find out more here.

Maximise your space

Steadyrack’s revolutionary design allows you to store your bike upright, off the floor and saves more of your valuable floor space. When the bike rack is empty, the arm simply folds away, making them a compact folding bike storage solution.

No lifting required

No need to lift and juggle your bikes, just balance your bike on the back wheel, push it in and allow the rack to do the lifting. Got a heavy bike? Just hold the back brake, grab the handlebars and walk backwards to lever the bike onto the rear wheel. An easy motion suitable for people of all ages, capabilities, and strengths.

Tyres fit snugly and securely

Holds up to 25kg, bikes with tyre width up to 2.4 inches fit snugly and securely. The Steadyrack can accommodate almost any type of bike, providing secure bike storage solutions for everyone.

Swivels up to 160 degrees

Steadyrack bike racks can be mounted vertically to almost any wall and will conveniently swivel up to 160 degrees, from side to side, allowing for significant space-saving advantages. Bikes can be overlapped in Steadyracks and stored close together without sacrificing the ease of loading or access to individual bikes.

Built to last to keep your bike protected

Change your bike, no need to change racks: Steadyracks are made with high-quality steel and plastic components which are designed to last a very long time when properly maintained. Unlike other racks, a Steadyrack won't damage your rims or the bike frame, as the only contact between the rack and your bike is with the front tyre.

Make going cycling easy

Unloading a Steadyrack is a breeze. Just grab your handlebars and pull. You’ll be out riding before you know it. Plus, if you store multiple bikes together, you’ll be able to access each individual bike easily thanks to the pivoting motion. 

Fit more bikes into smaller spaces

For limited wall space, you can stagger the height of the racks to overlap your bikes, making Steadyrack the perfect option for apartments and small sheds. Steadyracks can be placed as close as 350mm (1ft 2in) apart. For more information on spacing, see our Wall Placement Guide.

Easy to install

Each Steadyrack comes with fixings included for timber or masonry (brick/concrete) installation and detailed instructions. Easy for anyone with minimal DIY knowledge to install. You can find spacing and planning information along with installation videos on our installation advice page.

Preferred by these World Leading Brands

How to measure your bike

When deciding between our different bike racks, it comes down to tyre diameter (A), wheel diameter (B) and if you have fenders/mudguards.



Match your tyre width and wheel diameter to our bike rack types to find the best Steadyrack to suit your bike. Learn more about measuring your bike. We recommend a minimum 2cm / 3/4 inch clearance between the tyre and the fender arm stays to enable the rack to flex and fit between.

Installation Tips

Installing a Steadyrack is easy for anyone with basic DIY skills; no need to hire anyone to do the job! All the fixings required to install into any timber or masonry (concrete/brick) surface are also provided. All you need are a few tools, and you’re ready to go!

Check out our handy video below or view the Installation guide for all the details.

Installing multiple racks?
Check out our Wall Placement Guide for some extra pointers.

Installation guide

  • Dimensions 12cm x 12cm x 72cm
  • Weight 3.1kg
  • Material Chrome plated steel and plastic
  • Fender Saddle Material High quality, flexible nylon
  • Maximum Tyre Width Up to 2.4”
  • Recommended Wheel Diameter (inc Tyre) 20” – 29”
  • Bike Style Bikes WITH Fenders, Road, Time Trial, Hybrid, Small MTB, Commuter, City, Town
  • Bikes With Fenders Yes
  • Bikes Without Fenders Yes
  • Maximum Recommended Weight 25kg

    • Will hanging my bike damage the bike frame or forks?
    Hanging a bike in Steadyrack will not cause any damage to your bike. No part of the bike frame touches the rack, only the front tyre, which is cradled in the steel arms.
    Can I store my eBike with fenders in a Fender Rack?
    Yes – our Fender Rack can store all bikes, including bikes and eBikes with fenders, up to 25kg/55lbs. The fender saddle slots in between your bikes tyre and fender, meaning no part of your bike touches the rack.
    Can I load a heavier bike than 25kg into a Fender Rack Bike Rack?
    We don’t recommend exceeding the set weight limits for each rack. The extra weight and force of rolling a heavier bike onto the Fender Rack could possibly cause the arms to bend. Working to the weights outlined for each rack will remove any possibility of damaging the rack or your bike. If your bike is heavier and has fenders or mudguards, check out our eBike Rack.
    Will this bike rack for bikes with Fenders suit my aero/time trial bike?
    Yes – our Fender Rack is compatible and the rack we would recommend for people with aero/time trial bikes. The rubber end on the Fender Rack can easily fit between your tyre and down tube, which is normally a smaller gap on these types of bikes. The added benefit is a Steadyrack Fender Rack won’t damage your frame, which is important for such high-performance bikes!
    Are Steadyrack bike racks safe to use for bikes with hydraulic brakes/forks/suspensions?
    Yes! This a common concern for many bike owners with these types of brakes and suspension. When your bike is hung up vertically, the fluid in your forks will run towards the seals and keep them lubricated. This will prolong their use, so it’s actually good for your bike and forks to hang it vertically on our bike racks. If you have hydraulic brakes on your bike, the fluid will run down when the bike is hung, so we advise pumping the brakes a few times when you take the bike off the rack if it’s been there for a while. The shocks shouldn’t leak when the bike is hung up, however if they do then it’s a good indication that the seals might need replacing. Read our blog post for more information about storing bikes with hydraulic brakes in Steadyracks.
    Can I lock my bike to a Steadyrack?
    You can lock your bikes into our racks with a D Lock or Chain lock. This is sufficient to prevent opportunist theft and adequate if your bikes are stored in a private carpark. If your bikes are in a location fully accessible to the public, we recommend installing a bracket or a steel rail to the wall underneath the rack to attach a locking device to. As with everything, take caution when storing your bike in a public place, as professional thieves can generally get around any locking system.
    Do the racks swing freely?
    Steadyracks are assembled using a specific tension for the nuts (torque setting = 5nm) that holds the central spine to the top and bottom mounting brackets. This setting is designed to give sufficient tension to the pivot to ensure bikes can be loaded on any angle without the rack moving around too much. When you remove the 2 plastic caps from the top and bottom, the nuts are exposed. You can loosen both nuts to free up the rack more, and equally you can tighten them to lock the rack into position. We recommend you maintain them so the racks are stiff but can still be pivoted. The rack can be quite stiff when you use it for the first few times then it loosens up a bit. This is due to the type of fibre washers we use to assist with the stiffening effect.
    Can I lock my Steadyrack into one position or any angle?
    It is not possible to lock the rack solid in one position. However, you can tighten the nuts so the rack will become stiff and will effectively hold it in the one position. To do this, first remove the two plastic mounting bracket covers (End Caps). Next, tighten the two nuts that attach the central pivot bar to the mounting brackets. If you follow these steps, we recommend checking your fixings carefully and making sure they are very secure as any sideways pressure on the rack could damage the mounting bracket.
    Are Steadyracks suitable for apartments?
    Yes our racks are ideal for apartment buildings where the parking is in a secure environment and not exposed directly to the elements.

    What Our Customers Are Saying

    4.8
    Rated 4.8 out of 5 stars
    Based on 104 reviews
    Total 5 star reviews: 90 Total 4 star reviews: 11 Total 3 star reviews: 1 Total 2 star reviews: 2 Total 1 star reviews: 0
    Slide 1 selected
    Write a Review (Opens in a new window)
    104 reviews
    • RG
      Richard G.
      Flag of Canada
      Verified Buyer
      I recommend this product
      What are your favourite Steadrack features? Space saving
      Rated 4 out of 5 stars
      1 year ago
      Modification required

      Great rack. I had to bend the brackets to fit within my fender. Works great now

      Was this helpful?
    • S
      Stuart
      I recommend this product
      Rated 4 out of 5 stars
      1 year ago
      4 Stars

      The fender rack is good and pretty easy to install. I have one Ebike with full length mudguards and wanted to mount the bike vertically in a set space against a brick wall. I trial-tested the fitment of the bike in the rack while on the ground and found the support arms for my mudguards were fouling on the steadyrack arms, so with a little bit of effort I bent the support arms a little wider to help the bike slide in, plus the weight of the bike when loading it in, pulls the rack arms narrower, so the combination of both allows the bike to be loaded into the rack easily.

      Due to mounting on a brick wall I decided to get some additional fixings, 4x 8mm anchor bolts, which holds the rack and everything very securely.

      Fitting was easy and followed the video for measuring and calculating the total height I needed, marked out the hole positions and fitting was done.

      My main criticism of the whole steadyrack is the plastic top & bottom covers. I have no idea how the "Clips" are supposed to work, as even taking the plastic covers on & off with the rack not mounted was utterly pathetic. The plastic cover has finger hold areas that look as if you should push them in, but no matter what I did, the plastic would either just flex or simply not release from the clip. A very poor designed part for what is a pretty sturdy and robust mount. I can easily see these plastic parts being broken during install.

      Overall the steadyrack does the job I needed, was a bit pricier than I wanted to pay,…

      Was this helpful?
    • EK
      Edward K.
      Flag of Canada
      Verified Buyer
      I recommend this product
      What are your favourite Steadyrack features? Space saving
      Rated 5 out of 5 stars
      1 year ago
      Works great

      I have limited space to store my e-bikes. Was able to have all 3 on the same wall using the 16 inch stud spacing. It's a space saver when you can fold them over to one side. It would be nice to have a fat tire fender rack.

      Was this helpful?
    • AT
      Andreas T.
      Flag of Germany
      Verified Buyer
      I recommend this product
      What are your favourite Steadyrack features? Easy to use, Space saving, No heavy lifting
      Rated 4 out of 5 stars
      10 months ago
      Great product, but not so great packaging.

      The rack itself is great! I just deducted one star for all the unnecessary packaging:

      - the cardboard box is covered with a thin layer of plastic

      - the installation manual inside the box is in another plastic bag

      - the rack inside the card box is in another plastic bag

      - the cardboard box is closed with adhesive tape

      None of these things is necessary as the carboard box is a very stable. Leaving them away would be cheaper and better for the environment.

      Was this helpful?
      S Profile picture for Steadyrack
      Steadyrack
      10 months ago

      Hi Andreas, thank you for your valuable feedback. We always want to improve our product and packaging so that it is more environmentally friendly, so we will definitely take this onboard!

    • MB
      Michael B.
      Flag of United States
      Verified Buyer
      I recommend this product
      What are your favourite Steadyrack features? Easy to use, Easy to install, Look good, Space saving
      Rated 5 out of 5 stars
      1 year ago
      Great rack for big fender Townie

      Was wondering if it would work. It works like a champ

      Was this helpful?
    Reviews LoadedReviews Added